WELDING BUSINESS - Making Fences for Residents' Houses in Lhokseumawe

---

WELDING BUSINESS - Making Fences for Residents' Houses in Lhokseumawe

---

Story Introduction

Today, will start with a story introduction in the experience of making a Coffee Shop Door and WOX PC Repair, which I made a few months ago. with limited experience and a reckless will, then, I finished making the shop door, but it turned out, from the results, I got an offer to make a fence, with the price and capital owned by the homeowner.

the homeowner, I want to make a fence at a very cheap price, and of course it will be in conflict with other entrepreneurs around him with very large wages, however, I already know the homeowner and is very good with my family too, finally, I helped him by offering materials that had to be bought myself, and I only received the wages,

finally, the homeowner agreed, and bought some materials, which I also helped him to get a cheap price at one of the shops in Lhokseumawe city:

• Hollow Iron 30x30x 1.6
• Number of Iron 13 Bars
• Total Iron Price. IDR. 715,000,-
• (Lost Invoice)

and all equipment, brought home.

Business Equipment
The intention to help is firm, because I have the intention to open a business, and because the equipment for the welding business at home is still lacking, then, I am also determined to buy some additional equipment from this salary, for me to buy equipment that is still lacking, and will try to make other works of art, which may be useful for steem users and for me to post on steemit.com.

Well, the condition of this house no longer has a fence, because it has collapsed, and the condition is like the picture below:

---

---

for the convenience of the homeowner, and I saw the condition of the fence was already damaged and broken, because this house has an old and rusty fence. and the condition of the fence is as below.

---

---

Well, with the condition of the fence that was already empty, my mind started to spin to modify the old fence, and I combined it with iron and a new minimalist fence design, and the final result is as below:

---

---

---

---

---

---

---

How I Modified an Old Fence to NEW

---

In this section, my head began to think about modifying the old fence with a new design and adding new iron, so, after thinking, then, I came to the conclusion, the parts in the picture below, in No. 1 and No. 2, I put them back together and cleaned them, until they were clean and neat.

let's see the picture below:

---

---

after all neat and clean, then, I do welding of other parts, in combination with square iron, and I place it on each separate part, by combining all the flower parts found on the old iron, to the middle part, on the new iron, so, the combination of both, has become one now,

because I have cleaned it before, and I painted it with white paint, on the fence gabian below are:

No. 1 and No. 2 are the old iron parts, and the yellow one is the new iron. and the results of the modification, let's see below:

---

---

as you can see, that's above, the result; from the work on the fence of the house that I did has been completed.

Finally.
I made this fence myself, at first I did not intend to post it, so there are parts such as:

• cutting iron
• assembling
• painting
• cleaning
• installing the fence
• etc

I did not photograph it.

because I have bought some of the equipment stages that I have bought, then, finally I came to the conclusion, I posted it with the available photos.

hopefully with this post, other steem users will appear, to be more creative in running their work ideas and businesses.

this is all I can say, hopefully useful and will prepare the next business, and purchase other equipment for the iron welding business.

Best regards
@sultan-aceh

---

---

---

---

---

---

"Anda Penguna STEEM yang ingin mempromosikan blockchain Steem dan Steemit dengan tujuan menarik investor untuk mengeksplorasi peluang yang ditawarkannya. Jangan ragu untuk menggunakan video ini dan membagikan video tersebut di platform media sosial lainnya."

---

---

---